How to Overcome Android Bootloop HP

Are you experiencing a bootloop Android cellphone that is stuck with a logo or completely dead so it can’t be turned on? No need to worry, because there are still ways to easily deal with a bootloop Android phone.

This problem is often found on older Android phones. Generally, this problem occurs when the cellphone has been used for a very long time so that a bootloop occurs.

Constraints on Android can occur in software and hardware. However, cases that are very often found are related to applications, one of which is bootloop.

What is Bootloop?

Illustration of Android Phone

This problem is quite annoying because you can no longer use Android. Bootloop will make Android unable to boot the operating system, so that when it is turned on it only stops at the logo.

Especially on some Androids with severe bootloop, the cellphone only vibrates when trying to turn it on. While the screen does not show anything.

At the time of charging it also doesn’t come in, so most Android users who experience this can only surrender to the condition of their Android cellphone.

There are several things that can cause a bootloop, including:

1. Failed rooting process
2. ROM installation failed
3. It didn’t work when flashing
4. viral infection
5. And much more.

Bootloop Type

There are three types of bootloop according to their type and damage, here are the types of bootloop that you should know

Light Bootloop

The first type of bootloop is still categorized as light. The reason is that the boot process takes place so suddenly that the phone screen goes blank for a while.

This can occur due to very long game play, errors during application installation, and interference with the main system.

Medium Bootloop

This second type of bootloop is heavier than the first. Generally, a medium bootloop occurs when the user tries to make modifications via recovery mode.

Examples are rooting, installing additional scripts, and so on. Because if you don’t try it carefully, the process will fail.

As a result, Android will repeat the boot process. This is what can also be referred to as a bootloop.

Hard Boot

This last bootloop is a very severe one. The cause is a failed installation of a new ROM and a failure when updating the operating system.

As a result, the android phone won’t turn on, can’t turn on and in some cases it’s just stuck on the logo.

How to Overcome Android Bootloop HP

After understanding the causes and types, Babang will provide a tutorial on how to overcome bootloop on Android, see the following method:

1. Overcome Light Bootloop

Sim card illustration

When experiencing a light bootloop, the way to overcome it is quite easy. If it’s still on, try turning off your Android features first.

After that, remove the SIM card, SD card, and battery if possible. If your Android uses a built-in battery, then the battery does not need to be removed.

After that leave the HP in such conditions for 30 minutes to 24 hours. After passing this time, reinstall the battery, SIM card, and memory card that was removed.

After that, restart Android as usual. Look at the boot process, is it still the same as before or is it normal?

2. Clear Cache

Clear Cache Illustration

Overcoming Android bootloop can also be tried by clearing the cache. Because you can’t enter the Android system due to a bootloop, you have to use recovery mode to clear the cache.

To enter recovery mode, the method is different on each Android. However, a very familiar way is to press the power button together with the volume down.

Here’s how to handle a bootloop Android phone by clearing the cache:

1. In the off state, press the power button together with volume down for a few seconds.
2. Wait for the logo to appear and release it.
3. On the screen you will see the Recovery Mode display.
4. Then select the Advanced menu using the volume down button then press the power button to OK.
5. After that select the Wipe-Dalvik Cache option.
6. Then select the Mounts Storage menu.
7. Next select the Wipe cache option.
8. Wait for the process to finish and restart the HP.

Well, now you’ve managed to clear the cache from your Android phone. Now you can reactivate your Android phone so that it can be used again.

3. Wipe Cache Partition

Wipe Cache Partition Illustration

How to solve the next bootloop Android phone is still using recovery mode, but the trick is a little different. Because this method is done to clean the cache partition on Android.

Here’s how to wipe cache partition:

1. Press the power and volume down buttons for a few seconds until the screen shows the logo.
2. Release the button when you have successfully entered Recovery Mode.
3. Use the volume buttons to go down and up and the power button to select.
4. Select the Wipe Cache Partition option.
5. When the option to confirm appears, select Yes.
6. When the process ends, restart the Android phone.

After the cleaning process is complete, it is hoped that the HP will function normally again as before.

4. Factory Reset or Wipe Data

Factory reset illustration

It still fails after applying all the methods above, maybe you should delete all data on the smartphone and restore it to factory settings.

To apply these steps, again you have to use Recovery Mode. Because the bootloop can only be stuck on the logo or can’t even be turned on.

However, before doing a data wipe or hard reset, you should back up all data first. The reason is that the data will be lost after the process ends.

Check out how to solve a Bootloop Android cellphone with a reset:

1. First, press and hold the power button along with the volume down for a few seconds.
2. After entering Recovery Mode, select the Backup and Restore menu.
3. Next select Backup.
4. When finished, select Wipe Data / Factory Reset.
5. If there is a confirmation, select Yes.
6. Wait until the process is complete.

When finished and the Android phone can be used again normally, so you can restore the backup file or backup that you have done.

5. Flashing

Flashing illustration

The way to solve the last bootloop Android cellphone is to re-install the firmware or flash. This step is done to reinstall the firmware or the same operating system as before.

To flash, you need a computer and a firmware file that matches the brand and type of cellphone. The file can be obtained easily.

You just need to search on Google with the keyword “firmware (type HP)”. But you have to make sure that the firmware matches your cellphone type.

So that’s the way to overcome bootloop on Android smartphones, easy enough right? If you already know how to deal with it, you don’t have to bother spending money to go to an HP service place. Hope it is useful

Share :